Coyote Insulated Jacket

Coyote Insulated Jacket

Coyote Insulated Jacket
• Do not block the vents or openings on jacket with combustible material.
• The insulated jacket provides a barrier between the heat of the grill and any combustible materials.
• Feed the regulator hose and wires through protected openings on the jacket back to prevent damage.
• The grill warranty will be voided if you do not use a jacket on a combustible island.
Non-Combustible Construction
• Coyote grills can be placed directly on non-combustible materials.
• The grill is designed to hang from the countertop without support under the grill. There is no need to box in the frame of the grill.
• The minimum rear clearance for the hood to open is two inches.
• If a wall is behind the grill, the minimum clearance to that wall should be at least 7” to allow for exhaust ventilation.
Combustible Construction
• If using combustible material within 24” inches of the grill frame, you MUST use the correct Coyote jacket for installing the grill.
• The jacket is designed to hang from the countertop without support under the jacket. DO NOT box in the frame of the jacket.
• Coyote grills cannot be located under any combustible material at any height without an approved ventilation hood.
• Coyote does not define what material is considered combustible. Please consult with your builder or local inspector to determine.
**See the owner's manual for complete instructions and information on installing the grill. **

Please Contact Coyote Outdoor Living Customer Support for assistance.
Phone: 855-520-1559